Floorskills Straight Edge/Mitre Tool

Floorskills Straight Edge/Mitre Tool

£27.29 ex. VAT£32.75 inc. VAT

The mitre tool has been designed to cut perfect mitres when installing LVT. The mitre tool has a angle of 65 degrees so it will fit into corners that are not a perfect 45 degree. This has always been a issue with traditional straight edges. It is also a great straight edge with a accurate measurement gauge laser etched down the one side and is also very use-full for helping guide a grover. The straight edge is also cut from 2.5mm stainless steel so will not rust but makes it very easy for a knife etc to follow due to its thickness.

Tested and approved by FloorSkills training centre it is used on all of the FloorSkills LVT courses.

Manufactured from stainless steel.

34 in stock

Categories: , , , , , Brand:

Description

.The mitre tool has been designed to cut perfect mitres when installing LVT. The mitre tool has a angle of 65 degrees so it will fit into corners that are not a perfect 45 degree. This has always been a issue with traditional straight edges. It is also a great straight edge with a accurate measurement gauge laser etched down the one side and is also very use-full for helping guide a groover. The straight edge is also cut from 2.5mm stainless steel so will not rust but makes it very easy for a knife etc to follow due to its thickness.

Tested and approved by FloorSkills training centre it is used on all of the FloorSkills LVT courses.

Manufactured from stainless steel.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Scissor 10″
Scissor 10″ £36.80 ex. VAT£44.16 inc. VAT
EZ Shear 13″
EZ Shear 13″ £690.00 ex. VAT£828.00 inc. VAT
FloorSkills Herringbone Set-Up and Scribing Plate. 18″x4″
FloorSkills Herringbone Set-Up and Scribing Plate. 18″x4″ £143.53 ex. VAT£172.24 inc. VAT
Tramex CMexpert11 Hygro inlet part
Tramex CMexpert11 Hygro inlet part £15.00 ex. VAT£18.00 inc. VAT
TDS Grinding Segment 30S set of 6
TDS Grinding Segment 30S set of 6 £257.00 ex. VAT£308.40 inc. VAT
TDS 330 Laminate and LVT cutter guillotine
TDS 330 Laminate and LVT cutter guillotine £289.95 ex. VAT£347.94 inc. VAT
Glue Slugs 43mm 1Kg Box
Glue Slugs 43mm 1Kg Box £12.20 ex. VAT£14.64 inc. VAT
Adhesive Trowel A2 Spreader Blades 21cm
Adhesive Trowel A2 Spreader Blades 21cm £13.20 ex. VAT£15.84 inc. VAT
TDS to fit itools Diamond Segments 16 Grit Soft
TDS to fit itools Diamond Segments 16 Grit Soft £125.99 ex. VAT£151.19 inc. VAT
Carpet Awl 40mm shank
Carpet Awl 40mm shank £5.92 ex. VAT£7.10 inc. VAT
Wolff Duro Carriage bolt and safety washer
Wolff Duro Carriage bolt and safety washer £12.54 ex. VAT£15.05 inc. VAT
Tramex Cmex2 and other battery cover
Tramex Cmex2 and other battery cover £5.00 ex. VAT£6.00 inc. VAT
Wolff Samba base holder for handle 015464
Wolff Samba base holder for handle 015464 £90.16 ex. VAT£108.19 inc. VAT
Tramex CMEX5 Hand Held Pin Probe HH14TP30-B
Tramex CMEX5 Hand Held Pin Probe HH14TP30-B £160.00 ex. VAT£192.00 inc. VAT
TDS To fit HTC 16 Grit Hard Bond SOLD INDIVIDUALLY
TDS To fit HTC 16 Grit Hard Bond SOLD INDIVIDUALLY £30.49 ex. VAT£36.59 inc. VAT
Fento 400 Set 4 Elastic/velcro straps
Fento 400 Set 4 Elastic/velcro straps £19.49 ex. VAT£23.39 inc. VAT
AF tool face plate
AF tool face plate £7.56 ex. VAT£9.07 inc. VAT
Crain Turning tool
Crain Turning tool £14.70 ex. VAT£17.64 inc. VAT
Tramex interface cable RHIE2-B
Tramex interface cable RHIE2-B £120.00 ex. VAT£144.00 inc. VAT
TDS Reamer and Handle
TDS Reamer and Handle £19.95 ex. VAT£23.94 inc. VAT
Scissor 10″
Scissor 10″ £36.80 ex. VAT£44.16 inc. VAT
EZ Shear 13″
EZ Shear 13″ £690.00 ex. VAT£828.00 inc. VAT
FloorSkills Herringbone Set-Up and Scribing Plate. 18″x4″
FloorSkills Herringbone Set-Up and Scribing Plate. 18″x4″ £143.53 ex. VAT£172.24 inc. VAT
Tramex CMexpert11 Hygro inlet part
Tramex CMexpert11 Hygro inlet part £15.00 ex. VAT£18.00 inc. VAT
TDS Grinding Segment 30S set of 6
TDS Grinding Segment 30S set of 6 £257.00 ex. VAT£308.40 inc. VAT
TDS 330 Laminate and LVT cutter guillotine
TDS 330 Laminate and LVT cutter guillotine £289.95 ex. VAT£347.94 inc. VAT
Glue Slugs 43mm 1Kg Box
Glue Slugs 43mm 1Kg Box £12.20 ex. VAT£14.64 inc. VAT
Adhesive Trowel A2 Spreader Blades 21cm
Adhesive Trowel A2 Spreader Blades 21cm £13.20 ex. VAT£15.84 inc. VAT
TDS to fit itools Diamond Segments 16 Grit Soft
TDS to fit itools Diamond Segments 16 Grit Soft £125.99 ex. VAT£151.19 inc. VAT
Carpet Awl 40mm shank
Carpet Awl 40mm shank £5.92 ex. VAT£7.10 inc. VAT
Wolff Duro Carriage bolt and safety washer
Wolff Duro Carriage bolt and safety washer £12.54 ex. VAT£15.05 inc. VAT
Tramex Cmex2 and other battery cover
Tramex Cmex2 and other battery cover £5.00 ex. VAT£6.00 inc. VAT
Wolff Samba base holder for handle 015464
Wolff Samba base holder for handle 015464 £90.16 ex. VAT£108.19 inc. VAT
Tramex CMEX5 Hand Held Pin Probe HH14TP30-B
Tramex CMEX5 Hand Held Pin Probe HH14TP30-B £160.00 ex. VAT£192.00 inc. VAT
TDS To fit HTC 16 Grit Hard Bond SOLD INDIVIDUALLY
TDS To fit HTC 16 Grit Hard Bond SOLD INDIVIDUALLY £30.49 ex. VAT£36.59 inc. VAT
Fento 400 Set 4 Elastic/velcro straps
Fento 400 Set 4 Elastic/velcro straps £19.49 ex. VAT£23.39 inc. VAT
AF tool face plate
AF tool face plate £7.56 ex. VAT£9.07 inc. VAT
Crain Turning tool
Crain Turning tool £14.70 ex. VAT£17.64 inc. VAT
Tramex interface cable RHIE2-B
Tramex interface cable RHIE2-B £120.00 ex. VAT£144.00 inc. VAT
TDS Reamer and Handle
TDS Reamer and Handle £19.95 ex. VAT£23.94 inc. VAT

Related products