Description

1. Centralises any plank length Herringbone that is 4” in width
2. Base point to start 16” x 4” herringbone laying pattern
3. Manoeuvre Herringbone plate around the floor area to mark out glue lines and checking cut sizes to both perimeter fixings and borders. (16” x 4” planks)
4. A scribe plate which counters obstacles preventing scribing along with easier internal and external corner scribing.
5. Allows multiple scribe cuts to be made at once
6. Will also work when scribing is required on any length plank that is 4” in width on a 45 degrees to the walls
7. This come with a protective cover on the back

THIS ITEM DOES NOT FIT IN THE TDS CASE